+86-29-89284429
://Septa And Cap for Crimp Top Sample Vials

Septa And Cap for Crimp Top Sample Vials

Cap: Crimp Top
Structure: Septa And Cap
Septa: PTFE & Silicone

Category:

Description

Description of Septa And Cap for Crimp Top Sample Vials

Hawach Scientific Co., Ltd crimp caps provide excellent sealing, reducing the chance of sample evaporation. The cover is made of the aluminum cover and can be sealed with special tools to achieve a good sealing effect. Compared with the septa and cap for screw thread sample vials, it is more resistant to high temperatures in high temperature experimental environment and can adapt to harsh experimental conditions.

Features of Septa And Cap for Crimp Top Sample Vials

40°C to 200°C temperature range
Pre-assembled caps save you time and reduce contamination

Advantages of Septa And Cap for Crimp Top Sample Vials

Good quality control
Consistent quality between each batch
The strict sealing technique of the gland reduces the evaporation probability of the sample

Air Tightness Test for Caps and Septa

Experiment purpose:
To compare the airtightness property of Hawach cap and PTFE/Silica septa and the same type products of a world well-known brand A;

Experiment process:
Firstly, inject 1 ml ethanol and DI water into 2 ml Hawach and brand A sample vial, and then use microneedle to insert the cap and septa separately for every 30 mins, weight them after every injects and record the result.

Experiment result and discussion:
As shown in table 1, we can see that after 5 times injects and a period of evaporation, the total evaporation weight of ethanol for Hawach and brand A are 0.003g and 0.002g separately, corresponding the mass loss rate are 0.08% and 0.06% for them.

From table 2, the total evaporation weight of water for Hawach and brand A are 0.001g and 0.002g separately, corresponding the mass loss rates are 0.03% and 0.06% for them.

Both the ethanol and water mass loss rate are smaller than the standard level of 1.5% ± 0.5% and the test result of Hawach is very similar and even better than the one of world famous brand A, which indicates that Hawach caps and PTFE/Silica septa have very good airtightness when using no matter in organic solvent and water content solvent

Air Tightness Test for Caps and Septa_table1Air Tightness Test for Caps and Septa_table2

Technical Data

Septum Material Compatible with Incompatible with Resealability Max. Temperature
PTFE/Silicone,
PTFE/Silicone/PTFE
PTFE resistance until punctured, then septa
will have compatibility of silicone
—- Average < 200°C
Silicone/Silicone
Rubber
Alcohol, acetone, ether, DMF, DMSO ACN, THF, benzene chloroform, pyridine, hexane, heptane Excellent < 200°C
PTFE/Natural
or Butyl Rubber
PTFE resistance until punctured, then septa will have compatibility of rubber —- Good < 100°C
Rubber
(Natural or Butyl)
ACN, acetone, DMF, alcohols, diethylamine,
DMSO, phenols
Chlorinated solvents, aromatics, hydrocarbon  carbon disulfide Excellent < 100°C

Ordering Information

Item # Description
Crimp Vials, 2mL 12*32mm
SLSSC003S Preassemble, No pre-slit PTFE/silicone septa + Aluminum cap, for crimp top 2ml vial (11 mm mouth)
SLSSC003SP Preassemble, Pre-slit PTFE/silicone septa + Aluminum cap, for crimp top 2ml vial (11 mm mouth)
CONTACT FORM
Enter your email address to receive all news, updates on new arrivals,
special offers and other discount information.